OEM Factory for 3220 CCD Barcord Scanner Wholesale to Slovakia
OEM Factory for 3220 CCD Barcord Scanner Wholesale to Slovakia Detail:
Operational | |
Light Source | 625 nm visible LED |
Optical System | 2,500 pixel linear sensor |
Image Sensor | 32-bit |
Depth of Field | Min. bar width: 3 mil |
4 mil: 0 – 40 mm 5 mil: 0 – 45 mm | |
7.5 mil: 0 – 50 mm 10 mil: 0 – 60 mm | |
13mil: 0 – 75 mm 20 mil: 0 – 90 mm | |
(Note: DOF may vary depending on environment condition and barcode quality.) | |
Scan Rate | 150 scans per second |
Print Contrast | 30% @ UPC/EAN,100% |
Indicator | Two-colors LED |
Beeper Operation | Programmable tone & beep time |
System Interface | Keyboard, RS-232, HID USB, USB Virtual COM, wand, OPOS, JPOS |
Programmable Operation | Beeper tone & volume |
Physical | |
Dimension | 161.5 × 72.5 × 55.2 mm (device only) |
Weight | 91g (device only) |
Cable | Standard 2M straight |
Power | |
Input Voltage | 5 VDC ±10% |
Standby Current | 55 mA typical |
Operating Current | 90 mA (AVG), 150 mA (max.) |
Regulatory | |
EMC | CE & FCC DOC compliant, VCCI, BSMI |
Safety | IEC 62471 Exempt |
Environmental | |
Operating Temperature | 0°C – 50°C (32°F – 122°F) |
Storage Temperature | -20°C – 60°C (-4°F – 140°F) |
Humidity | 5% – 95% RH (non-condensing) |
Light Level | 6,000 Lux (fluorescence) |
Drop Durability | Designed to withstand 1.5M drops |
Decoding | |
1D Barcode | UPC/EAN/JAN, UPC-A & UPC-E, EAN-8 & EAN-13, JAN-8 &Code 93, ITF 2 of 5, IATA Code, MSI, China Postal Code, Code 32, Industrial 2 of 5, Standard 2 of 5, JAP, Code 11, GS1 DataBar,GS1 DataBar Limited, GS1 DataBar Expanded, Telepen |
Product detail pictures:
Related Product Guide:
Pricing Guidelines For a POS System
Guide to Getting an Efficient Restaurant POS System
Our primary objective is always to offer our clients a serious and responsible small business relationship, offering personalized attention to all of them for OEM Factory for 3220 CCD Barcord Scanner Wholesale to Slovakia, The product will supply to all over the world, such as: Karachi, Guatemala, Chile, We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.
By Darlene from Paraguay - 2016.06.19 13:51
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Paula from Zambia - 2015.06.09 12:42